BLTW ONE LED modules / Specials / Indoor
BLONE1300024DC14000827850W05 not available
Top Features
-
24VLamp voltage
-
2000mmMax. length
-
>80Colour rendering index CRI
-
1300lmLuminous flux per meter
- Tuneable White (TW)e = selectable colour temperature in a wide range of white light
- Physiologically valuable light (Human Centric Lighting)
- Adaptation to the biorhythm using a suitable control system
BILTONONE TW 1300 LED strip 24V DC 14,0W/m IP00 CRI>80 2700-5000K WHITE 5m
LED module BLTW ONE
Article 100505
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LED dimmer.
Suitable for ambient temperatures from -20 ... +45 °C at a service life of 60000 h .
The BLTW ONE LED-strip has a luminous flux of 1300 lm at 14.0 W, resulting in an efficiency of 108 lm/W. At a nominal voltage of 24 V DC on the connection, a maximum module length of 2000 mm can be achieved. In terms of lighting, the module has a colour temperature of 2700-5000 K and a beam angle of 120°. All this with a colour rendering index of >80 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 100.0 mm, resulting in a LED distance of 8.3 mm. Degree of protection IP00
Dimension (L x W x H): 5000.0 mm x 8.0 mm x 1.5 mm
| Mechanical data | |
|---|---|
| Width | 8.0 mm |
| Length | 5000.0 mm |
| Height/depth | 1.5 mm |
| Height | 1.5 mm |
| Colour | White |
| Model | Band |
| Self-adhesive | yes |
| Lamp type | LED nicht austauschbar |
| Distance | 8.3 mm |
| Degree of protection (IP) | IP00 |
| Length of particular segments | 100.0 mm |
| Lowest bending radius | 20 mm |
| With connection set | nein |
| With end piece | nein |
| Number of lamps per meter | 120 |
| Electrical data | |
|---|---|
| Protection class | ohne |
| Voltage type | DC |
| Lamp voltage | 24 V |
| Imput voltage range | 23 - 25 V |
| Lamp power per meter | 14.0 W |
| Overall efficiency | 108 lm / W |
| Light technical data | |
|---|---|
| Beam angle | 120° |
| Colour rendering index CRI | >80 |
| Colour temperature | 2700 - 5000 K |
| Luminous flux per meter | 1300 lm |
| Energy efficiency class provided exchangeable built-in lamp | A + |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Connection | |
|---|---|
| Conductor cross section | 0.5 mm² |
| Number of poles | 3 |
| Max. length | 2000 mm |
| Temperature technical data | |
|---|---|
| Ambient/storage temperature | - 5 ... + 55 °C |
| Operation temperature at Tc | - 5 ... + 60 °C |
| Ambient temperature during operating | - 20 ... + 45 °C |
| Rated life time L80/B10 at 25 °C | 60000 h |
| Packaging information | |
|---|---|
| EAN | 4250716914351 |
| Article no. | 100505 |
| Net weight | 49 g |
| Gross weight | 175 g |
| Gross width | 200.0 mm |
| Gross height | 18.0 mm |
| Gross length | 200.0 mm |
| Customs tariff number | 94054099 |
| Net width | 8.0 mm |
| Net height | 1.5 mm |
| Net length | 5000 mm |
| State of origin | AT |
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.
