BL ONE Comfort TWO 1300 - Indoor IP20 BL Shine LED-Strip / BL ONE Comfort / BL ONE Comfort TWO / BL ONE Comfort TWO 1300
BL ONE Comfort Two LED strip 1300lm/m 12VDC 12W/m IP20 830 5m available
Top Features
-
12VLamp voltage
-
2000mmMax. length
-
>80Colour rendering index CRI
-
1300lmLuminous flux per meter
- High separability of 25.0 mm reduces cold spots
- Particularly suitable for furniture due to 12 V DC voltage
- Flexible installation, with perfect corner lighting
- Also available in higher protection class IPX6
LED strip Comfort Two 1300lm/m 12VDC, 12 W/m, IP20, CRI>80, 3000K, separability 25mm, incl. 2-pole feeder 500 mm, 5 metres
LED module BL ONE Comfort TWO 1300 - Indoor IP20
Article 101737
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 °C at a service life of 60000 h .
The BL ONE Comfort TWO 1300 - Indoor IP20 LED-strip has a luminous flux of 1300 lm at 12.0 W, resulting in an efficiency of 108 lm/W. At a nominal voltage of 12 V DC on the connection, a maximum module length of 2000 mm can be achieved. In terms of lighting, the module has a colour temperature of 3000 K and a beam angle of 120°. All this with a colour rendering index of >80 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 25.0 mm, resulting in a LED distance of 8.3 mm. Degree of protection IP20
Dimension (L x W x H): 5000.0 mm x 8.0 mm x 1.1 mm
| Mechanical data | |
|---|---|
| Width | 8.0 mm |
| Length | 5000.0 mm |
| Height/depth | 1.1 mm |
| Height | 1.1 mm |
| Colour | White |
| Model | Band |
| Self-adhesive | yes |
| Lamp type | LED nicht austauschbar |
| Distance | 8.3 mm |
| Distance relating to | LED zu LED |
| Degree of protection (IP) | IP20 |
| Length of particular segments | 25.0 mm |
| Lowest bending radius | 20 mm |
| With connection set | yes |
| With end piece | nein |
| Number of lamps per meter | 120 |
| Electrical data | |
|---|---|
| Protection class | III |
| Voltage type | DC |
| Lamp voltage | 12 V |
| Lamp power per meter | 12.0 W |
| Overall efficiency | 108 lm / W |
| Light technical data | |
|---|---|
| Beam angle | 120° |
| Colour rendering index CRI | >80 |
| Colour temperature | 3000 K |
| Colour of light | White |
| Luminous flux per meter | 1300 lm |
| Energy efficiency class provided exchangeable built-in lamp | F |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Connection | |
|---|---|
| Conductor cross section | 0.5 mm² |
| Number of poles | 2 |
| Max. length | 2000 mm |
| Temperature technical data | |
|---|---|
| Ambient/storage temperature | - 5 ... + 55 °C |
| Operation temperature at Tc | - 5 ... + 60 °C |
| Ambient temperature during operating | - 20 ... + 45 °C |
| Rated life time L80/B10 at 25 °C | 60000 h |
| Packaging information | |
|---|---|
| EAN | 4250716929225 |
| Article no. | 101737 |
| Net weight | 49 g |
| Gross weight | 175 g |
| Gross width | 200.0 mm |
| Gross height | 18.0 mm |
| Gross length | 200.0 mm |
| Customs tariff number | 94054099 |
| Net width | 8.0 mm |
| Net height | 1.1 mm |
| Net length | 5000 mm |
| State of origin | AT |
* Information about the electrical and lighting technology measurements: Performance data measured after 1 min. at 25 °C ambient temperature and a light colour of 4,000 K (or RGB). These values can have a tolerance value of -/+ 15%. Module length at 24 V input voltage at the module and luminous flux drop 10% over the specified length.
