BLOPL 2000 >90 LED modules / Indoor
BLOPL2000024DC13620940000W05 not available
Top Features
-
24VLamp voltage
-
4000mmMax. length
-
>90Colour rendering index CRI
-
2000lmLuminous flux per meter
- Improvement of homogeneity by 20 additional LEDs per meter
- Wide choice of light colors and lumen packages
- Wide range of applications for linear lighting in white
- With a maximum module length of up to 4000 mm long, linear lighting lines can be implemented
BL ONE+ 2000 LED strip 24VDC 13,6W/m IP20 CRI>90 4000K WHITE 5m
LED module BLOPL 2000 >90
Article 102052
Linear LED light strip on a flexible circuit board. Installation using self-adhesive heat-conducting adhesive tape. Dimmable using BILTON LEDON Technology LED dimmer.
Suitable for ambient temperatures from -20 ... +45 °C at a service life of 60000 h .
The BLOPL 2000 >90 LED-strip has a luminous flux of 2000 lm at 13.6 W, resulting in an efficiency of 147 lm/W. At a nominal voltage of 24 V DC on the connection, a maximum module length of 4000 mm can be achieved. In terms of lighting, the module has a colour temperature of 4000 K and a beam angle of 120°. All this with a colour rendering index of >90 and a Binning selection based on SDCM3 (MacAdams). The light strip can be separated every 50.0 mm, resulting in a LED distance of 6.25 mm. Degree of protection IP20
Dimension (L x W x H): 5000.0 mm x 8.0 mm x 1.5 mm
| Mechanical data | |
|---|---|
| Width | 8.0 mm |
| Length | 5000.0 mm |
| Height/depth | 1.5 mm |
| Height | 1.5 mm |
| Colour | White |
| Model | Band |
| Self-adhesive | yes |
| Lamp type | LED nicht austauschbar |
| Distance | 6.25 mm |
| Distance relating to | LED zu LED |
| Degree of protection (IP) | IP20 |
| Length of particular segments | 50.0 mm |
| Lowest bending radius | 20 mm |
| With connection set | yes |
| With end piece | nein |
| Number of lamps per meter | 160 |
| Electrical data | |
|---|---|
| Protection class | III |
| Voltage type | DC |
| Lamp voltage | 24 V |
| Imput voltage range | 23 - 25 V |
| Lamp power per meter | 13.6 W |
| Overall efficiency | 147 lm / W |
| Light technical data | |
|---|---|
| Beam angle | 120° |
| Colour rendering index CRI | >90 |
| Colour temperature | 4000 K |
| Colour of light | White |
| Luminous flux per meter | 2000 lm |
| Energy efficiency class provided exchangeable built-in lamp | D |
| Colour consistency (McAdam ellipse) | SDCM3 |
| Connection | |
|---|---|
| Conductor cross section | 0.5 mm² |
| Number of poles | 2 |
| Max. length | 4000 mm |
| Temperature technical data | |
|---|---|
| Ambient/storage temperature | 0 ... + 60 °C |
| Operation temperature at Tc | - 5 ... + 60 °C |
| Ambient temperature during operating | - 20 ... + 45 °C |
| Rated life time L80/B10 at 25 °C | 60000 h |
| Packaging information | |
|---|---|
| EAN | 4250716939514 |
| Article no. | 102052 |
| Net weight | 49 g |
| Gross weight | 175 g |
| Gross width | 200.0 mm |
| Gross height | 18.0 mm |
| Gross length | 200.0 mm |
| Customs tariff number | 94054099 |
| Net width | 8.0 mm |
| Net height | 1.5 mm |
| Net length | 5000 mm |
| State of origin | AT |
* Specifications of the electrical and photometric parameters: All values are valid in the thermally steady state at 25 ° C ambient temperature under the standardized measuring environment of BILTON. Nominal lumen values differ for different light colors, these values can be found in the respective data sheets. All values can have tolerances of +/- 15 %.